本款型直流直流電值互調節器具體用到戶內 , 供穩定直流電值為0.66kV及下例 , 穩定頻率為50Hz或60Hz的洽談電路設計中有所作為直流直流電值 、 交流電在測量或繼電保養用。物料為塑殼式直流直流電值互調節器 廣泛應運應運到一整套的柜子中 , 其連接工藝可用于母排穩固和底板連接工藝, 適宜不同7J向連接, 一次性拖鏈電纜線多為母排或拖鏈電纜。
This type of current transformer is mainly used indoors, are applicable for alternating current systems of rated voltage up to and including 0.66kV and rated frequency 50Hz or 60Hz, used for current and electric energy measurement or relay protection. It is of moulded-case current transformer, is widely used in switchgear assemblies, can adopt installation method of busbar fixation or base plate fixation, can be installed in any direction, either busbar or cable can be used as primary conductor.
1、海拔:不超過1000米;
2、環境溫度:-5℃~+40℃;
3、空氣相對濕度:≤85%;
4、安裝場所:戶內(nei)。
1.Altitude should not exceed 1000m;
2.Ambient temperature: -5℃~+40℃;
3.Air relative humidity:≤85%;
4. Installation site: indoor。
1、額定二次電流:5A或1A;
2、功率因數:cosφ=0.8(滯后);
3、額定頻率:50Hz或者60Hz;
4、額定一次電流、 額定輸出及(ji)準確級見表1;
5、耐沖擊機械性能; 一些電機繞線對首次電機繞線及地和首次電機繞線對地能頂住工頻耐沖擊3kV時隔1min。
1. Rated secondary current: 5A or 1A;
2. Power factor: cos中=0.8 (lag) ;
3. Rated frequency: 50Hz or 60Hz;
4.Rated primary current, rated output and accurate level see table 1.,
5.Insulating property: primary winding to secondary winding and ground, and secondary winding to ground can bear the power frequency withstand voltage 3kV for 1min.
Diagrams and Tables of Window Size of BH-0.66 I Series
Diagram and Table of Overall Size of BH-0.66 Series I
Installation Way of BH-0.66 Series I Model